下挖25米工作量100-150立方每小時淘金船

流程概述 ：

原料通過挖斗進入四絞刀絞洗筒進行絞洗脫泥，然后進入滾筒篩內進行篩選分級為：<6mm細料、6-15mm粗料、15mm以上廢料三個級別，其中15mm以上廢料直接通過廢料溜槽排出至廢料區域；

6-15mm粗料進入一臺振動溜槽進行回收后，廢料排出至廢料區域；

<6mm細料排入盛料箱中，通過沙泵進入一臺臥式全自動連續排礦離心機內進行精選，精料排入精料筒內，廢料由廢料管排出。

The material from the bucket shipped into the trommel screen fixed with 4 reamers which can ream and wash the clay off,then to be separating into 3sizes <6mm,6-15mm＞15mm,the biggest size useless are directly discharged to waste area by scrap sluice;

6-15mm material into shaking chute for recycling, scrap material discharged into the waste area;

The small size material <6mm gettinginto the material box through sand pump feeding into a horizontal automaticdischarge gold concentrator,then concentrateget into concentrator box, scrap material to be get rid.