每小時200-300噸處理量沙金提取設備清單

2臺離心機-每小時200-300噸處理量沙金提取設備清單

Capacity200-300tph alluvial gold separting plant

沙金/明金/單晶體金回收率90%以上

Placer/visible/single crystal gold rocovery above 90%

注：每臺離心機6mm以下物料處理量80-100噸

≤6mm material work capacity 80-100tph

流程概述

原料通過自卸車將料倒入進料斗中，通過高壓水沖入振動篩內進行篩選分級為6mm以下、6-30mm、30mm以上三種規格物料，其中30mm以上的廢料直接通過廢料溜槽排入廢料池內；

6-30mm的中等規格物料排入兩條固定式淘金氈溜槽內進行回收后，廢料排入廢料池中，通過一臺挖斗式脫水機進行脫水后，由成品料輸送機輸送至成品料區域；

6mm以下的細料排入料箱內由一臺沙泵打入臥式全自動排礦離心機內進行精選，精選后的精料自動排入精料箱內，廢料自動排入廢料池中，經過另一臺挖斗式脫水機脫水后，由成品料輸送機輸送至成品料區域。

Technical process

Raw material get into feed hopper by dump truck,then into vibrating screen to be classified into 3size,≤6mm,6-30mm,≥30mm,the material≥30mm useless will be directly getting rid to to scrap pond;

The material 6-30mm get into 2 fixed gold sluice with carpet to be separated,then scrap will be removed the water by bucket dewater machine,then transported by conveyor to destination area;

The size≤6mm material getting into mineral box then pumping by sand pump into horizontal automatic discharge gold concentrator,the scrap into bucket dewater machine to get rid of water,then transported to destination area.

技術參數

Detail parameter